Description

Twin-roll crusher is also called the roll crusher; depending on the crusher crush the extrusion materials. Its structure is simple structure, and the refined grain size is small.

Main purposes: For mining, chemical, cement, refractories, building materials and other industrial sectors broken and the broken bits all kinds of middle of the hardness of rock and ore.

Counterattack Crusher

The counterattack Crushers is a kind of equipment which is used for building materials, chemicals, coal and other industrial sectors widely. It has used in coarse, minor and brittle medium hardness materials. For example, in limestone, dolomite, shale, sandstone, coal, asbestos, graphite and rock salt and so on. There are many advantages in this machine, such as the broken ratio is 10 -20 generally ; the highest is more than 50-60. The broken process of this machine is simple. Its structure is also easy to understand. Of course, for users, it is easy to manufacture it. It is convenient to use and maintenance. Also, the material can be chosen to break by the machine. At the same time, because of it usually focus on hammer plate wear, the fragmentation of hard materials has been limited.

Principle : When materials are putting into the chassis plate hammer role within the district, it was crushed as high-speed impact hammer crusher, meanwhile, it was thrown to the rotor installed above the counter plate are broken again. Then the counterattack plates fly back to the plate hammer shells role zone separating re-broken. Repeatedly, until the materials have been broken to the required size, and, at last, excrete the wastes out of the machine.

Jaw Crusher

Description : PE, PEX series of jaw crusher is a kind of complicated swaying crushing equipment, which is applicable to the industries of metallurgy, mine, construction, transportation and cement and can be used for grinding any ore or rock with the compression strength under 300Mpa. It has many advantages, such as reasonable structure, high output, toothed plate with long working life, well-proportioned granularity, low energy-cost and convenient maintenance and it's the most advanced machine in China. The principle of the machine is as follows: the motor drives belt and belt wheel to move the jaw. When the jaw moves upward, the angle between elbow plate and jaw will become larger to drive the moving plate to the fixed pate, so the material will be crushed. When the moving jaw moves downwards, the angle will become small, and under the action of spring, the moving jaw plate will move away from the fixed plate, so the feed will be discharged from the discharging entrance. With the continuous running of motor, the moving jaw will crush materials periodically, so the batch manufacture can be realized.

Crusher

The Crusher is used for sintered ore, coal, cement, Portland, glass, ceramics and other Industries. It is suitable for medium hardness of the material brittle fracture. It is mainly for the ore grinding operation. The machine is suitable for soft materials brittle and coarse broken in the field.

Circular cone Crusher

The series of crusher is suitable for all kinds of rocks and ores which hardness at the middle of high level. Its structure is liable and the efficiency is high. The users can adjust it easily, and, the most important of it is not expensive. According to the uses of ore cavity type, users can decide which kind of crushing chamber you must choose , the standard apply to broken. Medium for minor; Short for smallest minor .

Hammer Crusher

PC is a kind of broken material hammer equipment which draws up memo rotor. The machine has done the things after the high speed rotation hammer and the material collision hit each other and then broke the material. The broken can be put into two ways: dry and wet. It is used in many industry departments, such as do mine, metallurgy, building materials, thermoelectricity generation, fire-proof material, rock selection and so on. It is used into middle and smallest broken department on limestone, aluminum ore, intermediary, coke, oil shale, chalk, gypsum.